How to Fix Cloudy Pool Water in 5 Simple Steps
Cloudy pool water is one of the nightmares for swimming pool owners!
Low chlorine level, algae, or maybe extreme sunlight is the cause that your pool turned cloudy. Or maybe, it’s the poor filtration process that is causing cloudy pool water situation.
Don’t worry, you can still fix the cloudy pool water situation and enjoy a clean, transparent view of your pool. We’ve listed down some Easy-to-Follow pool cleaning steps, below. Let’s discuss how you can fix your cloudy pool water problem and regain that beautiful poolside view again!
What Causes Cloudy Pool Water?
Facing this situation despite maintaining a strict pool maintenance routine is common. There are several reasons your pool may develop cloudy water issue.
These causes can be:
- Algae growing within your pool water
- The water chemistry imbalance
- Failing to filtrate your pool water
- Accumulation of debris and dirt within the pool
There are several causes that you’re facing cloudy pool water issue. And you must examine your pool’s water condition thoroughly for identifying one or all of these causes.
How to Fix Cloudy Pool Water?
Cloudy pool water dims your swimming pool’s attraction. Whether its due to algae, imbalanced water chemistry or for another reason, it makes the whole pool unusable for someone who likes cleanliness. But the good news is that you can fix it by following tested cleaning methods.
We’ve outlined these methods in a step-by-step pattern for your help, below:
Step 1: Test the Water Chemistry
For removing the cloudy effect from your swimming pool’s water, the first step revolves around checking the water chemistry. It’s important and an essential step to understand your pool’s current water chemical balance so you can apply the right solution in it.
Follow these steps for testing water chemical imbalance:
- Get a water testing kit, check pH level of your pool, check alkalinity, and lastly check for calcium hardness.
- Once you complete the measurement, compare them with ideal ranges.
- The pH level should be between 7.4 to 7.6, alkalinity should be between 80-120 ppm. And lastly the calcium hardness needs to be between 200-400 ppm.
- After comparing the readings, the next step is to note down the possible issues for selecting the most relevant solution.
Step 2: Balance the Pool Chemistry
Once you identify the cause behind cloudy pool water, the next step becomes rather easier. Here are the possible solutions for each scenario to fix your pool:
- If pH level is above 7.6, use pH reducer and if its below 7.4, simply add some soda ash in your pool.
- If your pool’s alkaline level is out or range, using baking soda could fix this situation for you.
- You may use calcium hardness reducer product to resolve this issue within your poo.
Step 3: Shock the Pool
Once you fix your pool’s water chemical balance, the next step involves shocking the pool!
Add a large dose of chlorine in the pool to eliminate any buildups of algae, organic contaminants, or bacteria. Make sure to calculate the correct dosage of your pool shocking product to get the desired results.
Step 4: Use a Pool Clarifier or Flocculant
And once you complete shocking the pool, the next step involves using a pool clarifier or flocculant!
The logic behind using either a clarifier or flocculant is that it can spot the smallest particles left behind. Mix the recommended dosage of pool clarifier/flocculant and evenly distribute it across the pool. Wait till 12-24 hours till it settles down the debris at the bottom. Vacuum the pool thoroughly to remove every particle of dust that makes your pool dirty.
Step 5: Run the Pump & Filter Continuously
As a last step for fixing your cloudy pool water, run the pool filter!
It’s important to filter your pool after vacuuming so there are no remaining dirt particles in it. Ideally, you should let the filters do their job for at least 48 hours for getting optimal results. Just keep an eye on pressure gauge to make sure it functions properly.
Conclusion
It feels frustrating to deal with cloudy pool water if you have no idea how to fix this issue!
By following these easy steps, you can fix your cloudy water within your swimming pool. Make sure to check water condition and apply the right dosage of pool water cleaning products. Also, monitor the water condition thoroughly daily.
And if you have no idea how to clean your pool’s water, get our pool maintenance services. Schedule a pool maintenance demo by calling on +971 4 235 0843 or write us at care@innoviaproperties.com to get in touch with our experts.